BMW Inspection II

The following tasks are performed during the BMW Inspection II service. Minor differences will
occur depending on the year and car model.

Undercarriage

• Change engine oil and filter while engine is at normal operation temperature.
  
• Check transmission for leaks.
  
• Check rear axle for leaks.
  
• Visually check fuel tank, lines, and connections for leaks.
  
• Check condition, position, and mounting of exhaust system. Examine for leaks.
  
• Check power steering system for leaks.
  
• Check overall thickness of front and rear disc brake pads.
  
• Examine brake disc surfaces.
  
• Clean brake pad contact points in calipers.
  
• Grease wheel center hubs.
  
• Check steering for absence of play, condition of suspension track rods, front axle joints, steering
  linkage, and joint disc.
  
• Check front control arm bushing for wear.
  
• Check brake and clutch system connectors and lines for leaks, damage, and incorrect positioning.
  
• Check for free movement of the parking brake cables. Adjust parking brake if necessary.
  
• Check all tire pressures (including spare). Correct if necessary.
  
• Check condition of tires (outer surfaces, left/right), tread wear and pattern; In case of uneven
  tread wear readjust wheel alignment if required.
  
• Check thickness of parking brake linings.
  
• Half-shafts; check for leaks at flexible boots.
  
• Inspect entire body according to terms of rust prevention limited warranty.
  

Engine Compartment

• Read out diagnostic system
  
• Check engine cooling system/heater hose connections for leaks.
  
• Check coolant level and antifreeze protection level; add coolant if necessary.
  
• Check level of brake and clutch fluid in reservoir; add fluid if required.
  
• Check windshield washer fluid level and antifreeze protection. Fill up and/or correct if necessary.
  
• Check air conditioner for operation.
  
• Reset Service Indicator.
  
• Replace spark plugs.
  
• Replace intake air cleaner element.
  

Body/Electrical Equipment

• Check battery electrolyte level and add distilled water if required.
  
• Perform battery load test.
  
• Check lighting system headlights, fog lights, parking, backup, license plate, interior (including
  map reading lights), glove box, flashlight, illuminated makeup mirrors, luggage compartment
  lights.
  
• Check instrument panel and dashboard illumination.
  
• Check all warning/indicator lights, check control.
  
• Check turn signals, hazard warning flashers, brake lights, horns, headlight dimmer/flasher switch.
  
• Check wiper and washer system(s); wiper blades, washer jet positions.
  
• Check condition and function of safety belts.
  
• Oil hood, trunk/tailgate, and door hinges.
  
• Grease hood, trunk/tailgate and door latches. Check operation of all latches.
  
• Check central locking/double lock.
  
• Replace micro filter or Acc cabin filter.
  
• Check heater/air conditioner blower, rear window defogger.
  
• Check rear view mirrors
  
• Visually examine the SRS airbag units for torn cover, obvious damage or attachment of decals,
  decorations, or accessories.
  
• 
  

Final Test

• Road test with check of brakes, suspension, steering, clutch/manual transmission or automatic
  transmission.